Tajima error list

Tajima 226: Absolute origin limit (+X, -Y) detected

error frame Updated 2026-11-18
Quick answer Tajima 226 means The absolute origin limit was reached on the +X or -Y axis. The source says to correct the frame limit positions. First check: Correct the frame limit position(s).

What it means

The absolute origin limit was reached on the +X or -Y axis. The source says to correct the frame limit positions.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged frame. Browse all frame codes or all Tajima frame codes.

What the manual says to check

  1. Correct the frame limit position(s).
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 226 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 226 mean?

Tajima 226 means: The absolute origin limit was reached on the +X or -Y axis. The source says to correct the frame limit positions. It is an error code and should be cleared before production.

How do I clear Tajima 226?

Start with: Correct the frame limit position(s).

When should I call a technician for Tajima 226?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.