Tajima error list

Tajima 228: Table up/down operation was attempted although the frame was in…

error frame Updated 2026-11-18
Quick answer Tajima 228 means Table up/down operation was attempted although the frame was in the front side position. First check: Move the frame back to the rear most end before moving the table up/down.

What it means

Table up/down operation was attempted although the frame was in the front side position.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged frame. Browse all frame codes or all Tajima frame codes.

What the manual says to check

  1. Move the frame back to the rear most end before moving the table up/down.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 228 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 228 mean?

Tajima 228 means: Table up/down operation was attempted although the frame was in the front side position. It is an error code and should be cleared before production.

How do I clear Tajima 228?

Start with: Move the frame back to the rear most end before moving the table up/down.

When should I call a technician for Tajima 228?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.