Tajima error list

Tajima 2B8: When the pre-reading buffer becomes empty

error motorframedesign Updated 2026-11-18
Quick answer Tajima 2B8 means When the pre-reading buffer becomes empty. First check: During operation: Lower main shaft speed.

What it means

When the pre-reading buffer becomes empty.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged motor, frame, design. Browse all motor codes or all Tajima motor codes.

What the manual says to check

  1. During operation: Lower main shaft speed.
  2. During frame forward operation: Wait until all of the design data is read.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 2B8 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 2B8 mean?

Tajima 2B8 means: When the pre-reading buffer becomes empty. It is an error code and should be cleared before production.

How do I clear Tajima 2B8?

Start with: During operation: Lower main shaft speed. Then: During frame forward operation: Wait until all of the design data is read.

When should I call a technician for Tajima 2B8?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.