Tajima error list

Tajima 375: The Z-axis driver (Z-axis release solenoid) has received an…

error sensor Updated 2026-11-18
Quick answer Tajima 375 means The Z-axis driver (Z-axis release solenoid) has received an abnormal signal. First check: Check/replace the joint-25 card.

What it means

The Z-axis driver (Z-axis release solenoid) has received an abnormal signal.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged sensor. Browse all sensor codes or all Tajima sensor codes.

What the manual says to check

  1. Check/replace the joint-25 card.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 375 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 375 mean?

Tajima 375 means: The Z-axis driver (Z-axis release solenoid) has received an abnormal signal. It is an error code and should be cleared before production.

How do I clear Tajima 375?

Start with: Check/replace the joint-25 card.

When should I call a technician for Tajima 375?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.