Sensor codes on embroidery machines

42 manual-derived sensor codes and messages across Barudan, Tajima. Sensors tell the controller where the frame, needle, thread, and moving parts are. A sensor code can be a dirty lens, a loose connector, or a failed sensor.

What to check first

  • Clean the sensor and its reflector with a dry, lint-free cloth.
  • Check the connector at the sensor and at the board.
  • Look for a physical obstruction or a bracket that has moved.

General checks for the system, not a substitute for the code page or the manual.

Browse this system by brand

Barudan (6)Tajima (36)

Or see all 188 codes.

Every sensor code in the dataset

BrandCodeMeaningType
BarudanD01Needle Bar Not Lockederror
BarudanD03Color Change Lock Errorerror
BarudanD04Color Change Needle Sensor Errorerror
BarudanD39Looper Motor Errorerror
BarudanD40Chenille Thread Clamp Motor Errorerror
BarudanD41Chenille Needle Height Errorerror
Tajima08PTR tape signal troubleerror
Tajima211A fixed position signal is not detected. Main shaft Z signalerror
Tajima253Lower limit of the laser protect cover is not detectederror
Tajima254Upper limit of the laser protect cover is not detectederror
Tajima281Target needle position not detectederror
Tajima3A1The thread trimming driver has issued abnormal signalserror
Tajima3D1There is abnormality in a battery backup signalerror
Tajima3D2There is abnormality in a battery backup signalerror
Tajima3D3There is abnormality in a battery backup signalerror
Tajima3F3The thread tension release driver has received an abnormal signalerror
Tajima3A8A thread holding driver error signal is detectederror
Tajima311Encoder A signal status does not change for 5 seconds. Motor or…error
Tajima312Encoder z signal status does not change for 5 secondserror
Tajima314Main shaft rotation failureerror
Tajima317The take-up lever clutch has received an abnormal signalerror
Tajima322An X-axis pulse motor driver error signal is detectederror
Tajima323A Y-axis pulse motor driver error signal is detectederror
Tajima325Absolute origin could not be detected on the X or Y axis. Cap…error
Tajima341An M-axis base point signal is not detectederror
Tajima342An M-axis PMD abnormal signal is detectederror
Tajima345The M-axis clutch driver has received an abnormal signalerror
Tajima346The zig-zag PMD has received an abnormal signalerror
Tajima347An M-axis PMD abnormal signal is detectederror
Tajima352The sequin driver has issued abnormal signalserror
Tajima371Either an upper or lower position signal cannoterror
Tajima373The nipple position sensor issued an abnormal signalerror
Tajima374Nipple sensor signal abnormality, both inputs have signalserror
Tajima375The Z-axis driver (Z-axis release solenoid) has received an…error
Tajima381FX head needle position input errorerror
Tajima382The needle position signal status during color change does not…error
Tajima383Incorrect input of needle positionerror
Tajima385Lens does not move to the designated position when during lense…error
Tajima391Thread release input signal errorerror
Tajima51No stop position signal is outputerror
Tajima56Color change, half-turn cam signal troubleerror
Tajima57Needle position signal troubleerror
Machine down right now? Send the code and model. We’ll reply with the next step.
Request a repair callback →

FAQ

What does a sensor code mean on an embroidery machine?

It means the controller found a problem in the sensor system. The exact meaning depends on the brand, model, and code; the table above lists every sensor row in the FaultDesk dataset with its meaning and source.

Which brands are covered on this page?

Barudan, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.

Where do these codes come from?

Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.

Source: public manufacturer manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.