Tajima error list

Tajima 312: Encoder z signal status does not change for 5 seconds

error encodersensor Updated 2026-11-18
Quick answer Tajima 312 means Encoder z signal status does not change for 5 seconds. First check: Check the encoder and encoder signal lines.

What it means

Encoder z signal status does not change for 5 seconds.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged encoder, sensor. Browse all encoder codes or all Tajima encoder codes.

What the manual says to check

  1. Check the encoder and encoder signal lines.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 312 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 312 mean?

Tajima 312 means: Encoder z signal status does not change for 5 seconds. It is an error code and should be cleared before production.

How do I clear Tajima 312?

Start with: Check the encoder and encoder signal lines.

When should I call a technician for Tajima 312?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.