Tajima error list

Tajima 3A6: ATH movable knife retract position

error trimmer Updated 2026-11-18
Quick answer Tajima 3A6 means Incorrect ATH movable knife retract position. First check: Check the position of the ATH movable knife.

What it means

Incorrect ATH movable knife retract position.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged trimmer. Browse all trimmer codes.

What the manual says to check

  1. Check the position of the ATH movable knife.
From the shop floor. Owners report that removing the plate above the bobbin and sliding the ATH knife into the correct position clears 3A6. Source: Digitsmith forum thread (community report, not an official manual procedure). Original thread.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 3A6 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 3A6 mean?

Tajima 3A6 means: Incorrect ATH movable knife retract position. It is an error code and should be cleared before production.

How do I clear Tajima 3A6?

Start with: Check the position of the ATH movable knife.

When should I call a technician for Tajima 3A6?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.