Trimmer codes on embroidery machines
9 manual-derived trimmer codes and messages across Barudan, SWF, Tajima. Trimmer codes cover the thread trimmer, the waste bin, and the trimmer motor. A trimmer fault can stop the machine mid-design.
What to check first
- Look for a thread jam in the trimmer and the waste path.
- Check the blade and the trimmer mechanism for lint.
- Check the trimmer motor connector before resetting.
General checks for the system, not a substitute for the code page or the manual.
Every trimmer code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D12 | Trimmer slider error | error |
| Barudan | D22 | Trimmer motor error | error |
| Barudan | D28 | No further Stitch Back or Automending due to Color Change | |
| Barudan | D36 | Stopped for Bobbin Counter | stop code |
| SWF | 103 | Trimmer knife did not return | error |
| Tajima | 1B4 | Stop due to thread trimming code | stop code |
| Tajima | 3A1 | The thread trimming driver has issued abnormal signals | error |
| Tajima | 3A2 | Thread trimming output time exceeded | error |
| Tajima | 3A6 | ATH movable knife retract position | error |
FAQ
What does a trimmer code mean on an embroidery machine?
It means the controller found a problem in the trimmer system. The exact meaning depends on the brand, model, and code; the table above lists every trimmer row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.