Barudan XS/XY series

Barudan D22: Trimmer motor error

error threadtrimmermotor Updated 2026-11-18
Quick answer Barudan D22 means The trimmer motor is jammed, or it is not stopping in the correct position. The source says to power off to reset, clear any bird's nest from under the throat plate, and check the trimmer blade adjustment. First check: Trimmer motor is jammed or not stopping in the correct position.

What it means

The trimmer motor is jammed, or it is not stopping in the correct position. The source says to power off to reset, clear any bird's nest from under the throat plate, and check the trimmer blade adjustment.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged thread, trimmer, motor. Browse all thread codes or all Barudan thread codes.

What the manual says to check

  1. Trimmer motor is jammed or not stopping in the correct position.
  2. You must turn machine Off to reset this error.
  3. Check the trimmer blade adjustment.
  4. Birdnesting of thread will knock trimmers out of adjustment when trying to trim.
  5. Remove any excess thread from under throat plate and reset trimmer blade if needed.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D22 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D22 mean?

Barudan D22 means: The trimmer motor is jammed, or it is not stopping in the correct position. The source says to power off to reset, clear any bird's nest from under the throat plate, and check the trimmer blade adjustment. It is an error code and should be cleared before production.

How do I clear Barudan D22?

Start with: Trimmer motor is jammed or not stopping in the correct position. Then: You must turn machine Off to reset this error. Then: Check the trimmer blade adjustment.

When should I call a technician for Barudan D22?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.