Barudan XS/XY series

Barudan D38: Chenille Driver Error

error needlemotor Updated 2026-11-18
Quick answer Barudan D38 means The chenille driver reported a fault. The source says to reboot and check that the chenille driver box is on, then check the needle-bar rotation motor wiring and call technical support. First check: Turn off the machine and reboot.

What it means

The chenille driver reported a fault. The source says to reboot and check that the chenille driver box is on, then check the needle-bar rotation motor wiring and call technical support.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged needle, motor. Browse all needle codes.

What the manual says to check

  1. Turn off the machine and reboot.
  2. Make sure the Chenille Driver box is turned On.
  3. If the same error message displays again, check the wiring to the Needle Bar rotation motor.
  4. Otherwise motor may be faulty or jammed Call Tech support.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D38 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D38 mean?

Barudan D38 means: The chenille driver reported a fault. The source says to reboot and check that the chenille driver box is on, then check the needle-bar rotation motor wiring and call technical support. It is an error code and should be cleared before production.

How do I clear Barudan D38?

Start with: Turn off the machine and reboot. Then: Make sure the Chenille Driver box is turned On. Then: If the same error message displays again, check the wiring to the Needle Bar rotation motor.

When should I call a technician for Barudan D38?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.