Barudan XS/XY series

Barudan D39: Looper Motor Error

error motorsensor Updated 2026-11-18
Quick answer Barudan D39 means The looper motor did not report the expected position. The source says to reboot, then turn the looper motor shaft by hand until the top shaft sensor turns on, and call technical support if it persists. First check: Turn off the machine and reboot.

What it means

The looper motor did not report the expected position. The source says to reboot, then turn the looper motor shaft by hand until the top shaft sensor turns on, and call technical support if it persists.

This page is generated from a public source: Barudan America — XS/XY Error Messages. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged motor, sensor. Browse all motor codes or all Barudan motor codes.

What the manual says to check

  1. Turn off the machine and reboot.
  2. If still a problem, turn the Looper motor shaft manually until the (top) shaft sensor turns On and retry.
  3. Call Tech support for more help.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Barudan D39 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Barudan codes

FAQ

What does Barudan D39 mean?

Barudan D39 means: The looper motor did not report the expected position. The source says to reboot, then turn the looper motor shaft by hand until the top shaft sensor turns on, and call technical support if it persists. It is an error code and should be cleared before production.

How do I clear Barudan D39?

Start with: Turn off the machine and reboot. Then: If still a problem, turn the Looper motor shaft manually until the (top) shaft sensor turns On and retry. Then: Call Tech support for more help.

When should I call a technician for Barudan D39?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: Barudan America — XS/XY Error Messages. Barudan XS/XY series error messages. Verify against your exact model and manual.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.