Tajima encoder error codes

The 7 Tajima rows tagged encoder in the FaultDesk dataset. Encoder codes cover position feedback. The controller cannot confirm where an axis is. This is usually a connector, contamination, or a failed encoder.

What to check first

  • Check the encoder connector and the cable for damage.
  • Check for oil, dust, or a loose encoder disc.
  • Do not run the machine on a guessed position; call a technician.

System-level checks. Open the code page for the manual’s steps.

CodeMeaningType
211A fixed position signal is not detected. Main shaft Z signalerror
311Encoder A signal status does not change for 5 seconds. Motor or…error
312Encoder z signal status does not change for 5 secondserror
314Main shaft rotation failureerror
324Frame feed output when the needle penetrates the fabricerror
342An M-axis PMD abnormal signal is detectederror
51No stop position signal is outputerror

See all encoder codes across brands, or the Tajima hub.

Machine down right now? Send the Tajima code and model. We’ll reply with the next step.
Request a repair callback →
Source: public manuals and support bulletins, linked from each code page. Independent and unofficial. Verify against the manual for your exact model.