Tajima 51: No stop position signal is output
What it means
No stop-position signal is output, so the control cannot confirm the machine's stop position. The source points to the encoder or the machine card.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged encoder, sensor. Browse all encoder codes or all Tajima encoder codes.
What the manual says to check
- Encoder or machine card trouble.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 51 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 51 mean?
Tajima 51 means: No stop-position signal is output, so the control cannot confirm the machine's stop position. The source points to the encoder or the machine card. It is an error code and should be cleared before production.
How do I clear Tajima 51?
Start with: Encoder or machine card trouble.
When should I call a technician for Tajima 51?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.