Encoder codes on embroidery machines
8 manual-derived encoder codes and messages across Barudan, Tajima. Encoder codes cover position feedback. The controller cannot confirm where an axis is. This is usually a connector, contamination, or a failed encoder.
What to check first
- Check the encoder connector and the cable for damage.
- Check for oil, dust, or a loose encoder disc.
- Do not run the machine on a guessed position; call a technician.
General checks for the system, not a substitute for the code page or the manual.
Every encoder code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D11 | Rotary Encoder Error | error |
| Tajima | 211 | A fixed position signal is not detected. Main shaft Z signal | error |
| Tajima | 311 | Encoder A signal status does not change for 5 seconds. Motor or… | error |
| Tajima | 312 | Encoder z signal status does not change for 5 seconds | error |
| Tajima | 314 | Main shaft rotation failure | error |
| Tajima | 324 | Frame feed output when the needle penetrates the fabric | error |
| Tajima | 342 | An M-axis PMD abnormal signal is detected | error |
| Tajima | 51 | No stop position signal is output | error |
FAQ
What does a encoder code mean on an embroidery machine?
It means the controller found a problem in the encoder system. The exact meaning depends on the brand, model, and code; the table above lists every encoder row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.