Tajima error list

Tajima 324: Frame feed output when the needle penetrates the fabric

error needleencoderframe Updated 2026-11-18
Quick answer Tajima 324 means Frame feed output when the needle penetrates the fabric. First check: Decrease the machine operating speed.

What it means

Frame feed output when the needle penetrates the fabric.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged needle, encoder, frame. Browse all needle codes or all Tajima needle codes.

What the manual says to check

  1. Decrease the machine operating speed.
  2. Check the rotary encoder and encoder wiring.
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 324 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 324 mean?

Tajima 324 means: Frame feed output when the needle penetrates the fabric. It is an error code and should be cleared before production.

How do I clear Tajima 324?

Start with: Decrease the machine operating speed. Then: Check the rotary encoder and encoder wiring.

When should I call a technician for Tajima 324?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.