Tajima error list

Tajima 58: One turn of the main shaft motor takes over 5 seconds

error motor Updated 2026-11-18
Quick answer Tajima 58 means One turn of the main shaft motor takes over 5 seconds. First check: Check for a mechanical bind in the main shaft, motor and belt.

What it means

One turn of the main shaft motor takes over 5 seconds.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged motor. Browse all motor codes or all Tajima motor codes.

What the manual says to check

  1. Check for a mechanical bind in the main shaft, motor and belt.
When to call a technician. This code can involve a board, driver, motor, or replacement part. If the checks above do not clear it, stop and call a technician rather than guessing.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 58 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 58 mean?

Tajima 58 means: One turn of the main shaft motor takes over 5 seconds. It is an error code and should be cleared before production.

How do I clear Tajima 58?

Start with: Check for a mechanical bind in the main shaft, motor and belt.

When should I call a technician for Tajima 58?

If the checks above do not clear the code, or if the fix involves a board, driver, motor, or replacement part, call a technician. Do not keep running production with an unresolved fault.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.