Needle codes on embroidery machines
17 manual-derived needle codes and messages across Barudan, SWF, Tajima. Needle codes cover needle position, needle breakage, and the needle bar. A needle code after a break is a warning to check the timing, not just the needle.
What to check first
- Remove the broken needle and check the needle bar.
- Check the needle is the right type and is seated correctly.
- If the machine says the timing is off, call a technician.
General checks for the system, not a substitute for the code page or the manual.
Every needle code in the dataset
| Brand | Code | Meaning | Type |
|---|---|---|---|
| Barudan | D01 | Needle Bar Not Locked | error |
| Barudan | D04 | Color Change Needle Sensor Error | error |
| Barudan | D38 | Chenille Driver Error | error |
| Barudan | D41 | Chenille Needle Height Error | error |
| SWF | 101 | Main board or overload | error |
| SWF | 102 | Main board or overload | error |
| SWF | 103 | Trimmer knife did not return | error |
| SWF | 300 | Needle position signal | error |
| Tajima | 212 | Needle bar is in lowering position | error |
| Tajima | 281 | Target needle position not detected | error |
| Tajima | 324 | Frame feed output when the needle penetrates the fabric | error |
| Tajima | 381 | FX head needle position input error | error |
| Tajima | 382 | The needle position signal status during color change does not… | error |
| Tajima | 383 | Incorrect input of needle position | error |
| Tajima | 54 | Left and right limits on the color change are detected | error |
| Tajima | 56 | Color change, half-turn cam signal trouble | error |
| Tajima | 57 | Needle position signal trouble | error |
FAQ
What does a needle code mean on an embroidery machine?
It means the controller found a problem in the needle system. The exact meaning depends on the brand, model, and code; the table above lists every needle row in the FaultDesk dataset with its meaning and source.
Which brands are covered on this page?
Barudan, SWF, Tajima. The dataset is expanded as public manuals and support bulletins are normalized; a brand missing here may still have a code page in the brand hub.
Where do these codes come from?
Public manufacturer manuals and support bulletins. Every code page links to its source. FaultDesk is independent and unofficial; verify against the manual for your exact model.