Tajima error list

Tajima 383: Incorrect input of needle position

error needlemotorsensor Updated 2026-11-18
Quick answer Tajima 383 means The needle-position input is wrong, or no needle-position signal is seen while the main shaft rotates. The source says to check the needle count in the parameters and the needle-position potentiometer. First check: Check the setting for number of needles in the parameter settings *Check the potentiometer (needle position sensor).

What it means

The needle-position input is wrong, or no needle-position signal is seen while the main shaft rotates. The source says to check the needle count in the parameters and the needle-position potentiometer.

This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.

This code is tagged needle, motor, sensor. Browse all needle codes or all Tajima needle codes.

What the manual says to check

  1. Check the setting for number of needles in the parameter settings *Check the potentiometer (needle position sensor).
When to call a technicianIf the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Not sure whether to keep going? Read when to call a technician or how to read a code.

Repair deskNo. ______

Still down?

Send Tajima 383 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.

Request a repair callback →

No account. No charge to ask. If the machine is mid-order, say so in the notes.

Related Tajima codes

FAQ

What does Tajima 383 mean?

Tajima 383 means: The needle-position input is wrong, or no needle-position signal is seen while the main shaft rotates. The source says to check the needle count in the parameters and the needle-position potentiometer. It is an error code and should be cleared before production.

How do I clear Tajima 383?

Start with: Check the setting for number of needles in the parameter settings *Check the potentiometer (needle position sensor).

When should I call a technician for Tajima 383?

If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.

Source: The Embroidery Warehouse — Tajima Machine Error List. Manual-derived error list. Verify against your exact model and manual before repairing.

Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.