Embroidery machine stop codes
The 19 rows the source calls stop codes, across Tajima, Barudan, and SWF. A stop code is not always an error: some are messages the machine uses to pause safely.
| Brand | Code | Meaning | Systems |
|---|---|---|---|
| Barudan | D19 | Stopped for Stop Code | design |
| Barudan | D21 | Stopped by Stop Switch | |
| Barudan | D23 | Stopped for Appliqué | design |
| Barudan | D25 | Stopped for Thread Break | threadtension |
| Barudan | D27 | Stopped for Temporary Repair Stop | designpneumatic |
| Barudan | D32 | Stopped for Sub End Code | design |
| Barudan | D34 | Stopped by Light Curtain | |
| Barudan | D36 | Stopped for Bobbin Counter | bobbintrimmer |
| Tajima | 1B1 | Stop due to frame stepping code | frame |
| Tajima | 1C1 | Stop occurred because bar switch was pressed during frame stepping | frame |
| Tajima | 1D1 | Stop at the start of all-head embroidery due to the stop setting | |
| Tajima | 1B2 | Stop due to stop code | frame |
| Tajima | 1C2 | Stop by manual ATH operation | frame |
| Tajima | 1D2 | Stop by preset halt | |
| Tajima | 1B3 | Stop due to end code 1 | frame |
| Tajima | 1B4 | Stop due to thread trimming code | threadtrimmer |
| Tajima | 1B5 | Stop due to a sequin code | |
| Tajima | 1B6 | Stop due to automatic free setting offset code | |
| Tajima | 3C1 | Power switched on while bar switch was held | power |
Browse by system or see all 188 codes.
Machine down right now? Send the code and model. We’ll reply with the next step.
Request a repair callback →
Source: public manuals and support bulletins, linked from each code page.
Independent and unofficial. Verify against the manual for your exact model.