SWF 103: Trimmer knife did not return
What it means
The trimmer knives did not return to their start position. The bulletin says a bird's nest can stop the silver knife from seating under the black knife cover, or grease on the plunger can stop it recessing; the trimmer area has to be cleared and checked.
This page is generated from a public source: SWF / Coldesi support — Errors 101, 102, 103 and 300. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged thread, needle, trimmer, lubrication. Browse all thread codes.
What the manual says to check
- A bird's nest can stop the silver knife from seating under the black knife cover.
- Remove the needle plates, clear any thread or debris under the black piece, and check that the silver knife swings out and seats fully.
- If grease has built up on the plunger, clean it so the plunger recesses and can fire again on the next trim command.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send SWF 103 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related SWF codes
FAQ
What does SWF 103 mean?
SWF 103 means: The trimmer knives did not return to their start position. The bulletin says a bird's nest can stop the silver knife from seating under the black knife cover, or grease on the plunger can stop it recessing; the trimmer area has to be cleared and checked. It is an error code and should be cleared before production.
How do I clear SWF 103?
Start with: A bird's nest can stop the silver knife from seating under the black knife cover. Then: Remove the needle plates, clear any thread or debris under the black piece, and check that the silver knife swings out and seats fully. Then: If grease has built up on the plunger, clean it so the plunger recesses and can fire again on the next trim command.
When should I call a technician for SWF 103?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.