Tajima 281: Target needle position not detected
What it means
The target needle position was not detected within 15 seconds of the start of a colour change. The source says to check the colour-change shaft and the needle-position display, then the colour-change sensors.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged needle, sensor. Browse all needle codes or all Tajima needle codes.
What the manual says to check
- Turn the shaft of the color change box to check to see if needle position display is correct.
- Correct display, action complete.
- Incorrect display, check color change sensor(s).
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 281 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 281 mean?
Tajima 281 means: The target needle position was not detected within 15 seconds of the start of a colour change. The source says to check the colour-change shaft and the needle-position display, then the colour-change sensors. It is an error code and should be cleared before production.
How do I clear Tajima 281?
Start with: Turn the shaft of the color change box to check to see if needle position display is correct. Then: Correct display, action complete. Then: Incorrect display, check color change sensor(s).
When should I call a technician for Tajima 281?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.