Tajima 57: Needle position signal trouble
What it means
The needle-position signal is missing or wrong, so the control cannot confirm where the needle bar is. The source says to check the needle-position card and for a mechanical bind in the colour-change system.
This page is generated from a public source: The Embroidery Warehouse — Tajima Machine Error List. It is a starting point, not a substitute for the manual for your exact model.
This code is tagged needle, sensor. Browse all needle codes or all Tajima needle codes.
What the manual says to check
- Check needle position card.
- Check for a mechanical bind in the color change system.
Not sure whether to keep going? Read when to call a technician or how to read a code.
One tap helps the next person with this code. No account, no email. You can add detail if you want; it is optional.
Add detail (optional)
No names, emails, or serial numbers, please.
Still down?
Send Tajima 57 to a technician. Tell us the model and what the machine is doing. We’ll reply with the next step: a remote check, a part, or someone who services your area.
No account. No charge to ask. If the machine is mid-order, say so in the notes.
Related Tajima codes
FAQ
What does Tajima 57 mean?
Tajima 57 means: The needle-position signal is missing or wrong, so the control cannot confirm where the needle bar is. The source says to check the needle-position card and for a mechanical bind in the colour-change system. It is an error code and should be cleared before production.
How do I clear Tajima 57?
Start with: Check needle position card. Then: Check for a mechanical bind in the color change system.
When should I call a technician for Tajima 57?
If the code returns after the checks above, or the machine develops a new noise, vibration, or thread break, call a technician.
Corrections: if this page is wrong for your model, keep the source link and the model/serial number. The correction process is described in Method & disclaimer.